LDA1-CP1-D is packaged in a 6 sided metal enclosure with small size; it prevents drivers and other electronic devices from interfering with each other. It is designed to drive p-type diode lasers with good control and stability. It can monitor the drive current and output laser power. Two versions are available: the LDA1-CP1-D-SNI and the LDA1-CP1-D-SNO. The former one represents that the external signal synchronizes the signal of the chip, and the latter one is that the signal of the chip synchronizes the external signal.(more)
To meet the requirements of our dear customers, ATI has invested substantive manpower, material resources and funds to develop new products. Finally, we developed this Ultra Low Noise Diode Laser Drivers/Controllers, whose part No. is ATLS200MA103. In the part No., 200mA represents its means output current, while 103 is our series Number.(more)
As I have introduced before that we have developed laser driver, ATLS4A214D and ATLS6A214D, we designed this evaluation board to evaluate the above high voltage laser driver conveniently. The product I am going to introduce is 214 series’ evaluation board, whose part No. is ATLS214EV1.0. Please note that you’d better know about our constant laser drivers/controllers in advance as this evaluation board is specially designed for this series of laser drivers.(more)
To be outstanding in the field of analog electronics, Analog Technologies, Inc.(hereafter referred to as ATI) has invested massive manpower physical resources. Now, through efforts, ATI has accumulated over ten thousand customers, and all of them are satisfied with our excellent service. Meanwhile, many people are amazed at the technology in laser control and TEC control that we have achieved. Today let me introduce one high efficiency constant current laser controller, whose part No. is CWD-01-V2-D. Please take a look at its physical photo of this laser driver.(more)
In the field of analog electronics, it is very hard to achieve Constant Current and Constant Power simultaneously. ATI inputs great efforts and time into developing this product, whose part No. is LDA1-CP1. It is a great laser driver that is popular among customers. As for the reasons, which can be concluded as high efficiency, 2A output current and compact size.(more)
TEC module is also called thermoelectric cooler that is used to cool down or heat up objects. Long life TEC modules refer to those TECs that can be used in thermal cycling application, such as PCR devices, thermal cyclers, chillers and analyzers, thus they are also called thermal cycling TEC modules.(more)
Long life TEC modules refer to those that are designed for thermal cycling applications, i.e. frequent changes between heating up and cooling down. It is not practical for standard TEC modules since the life time will be largely reduced. This long life TEC module has much longer operational life than standard TEC in terms of thermal cycling application, thus it can be also called thermal cycling TEC module.(more)
ATH10KL2C ntc thermistor assembly is similar to ATH10KL2B. The difference between them lies in the size of the ring lug outside the thermistor head. The thermistor head inside the ring lug is the same, a glass encapsulated ntc thermistor. The inner diameter of the ring lug in ATH10KL2C is larger than that in ATH10KL2B, which means a larger hole.(more)
ATLS4A214 is a high voltage constant current laser diode driver, which comes with a wide input voltage range, from 5V to 14V. This laser diode driver has a high efficiency, over 90%, so there is no need for heat sinks.(more)
ATH100K1R25 is a glass encapsulated ntc thermistor with two copper coated lead wires. This ntc thermistor has higher stability and precision than general epoxy encapsulated thermistor. The thermistor can be used to sense the temperature for those applications, where require high temperature sensitivity, long term stability, and high sensing temperature, such as optical components, laser drivers, industrial process control, etc..(more)
