SMT inductor kits are designed and used for easy access to SMT inductors. These SMT inductors are stored and presorted in a component enclosure, which is designed and manufactured by ATI. The component enclosure comes with 128 lidded coverlets and a final top cover. The enclosure has an A4 paper size and can be carried with users easily by placing it into a bag. During transportation, the components inside the enclosure would not be leaked out since a foam pad inside the top cover will keep all the lids of the coverlets closed and locked tightly.(more)

2. NTC thermistor medical implantable sensor Implantable sensor requires a compact size, light weight and body compatible. It should have a very small power. The most important, the thermistor cannot decay over time. Generally, this kind of thermistor sensor is very expensive and needs medical experts to do surgery for transplanting.(more)

ATFLD1W830 is a fiber coupled laser diode module, which is designed and used in printing, medical laser treatment, and many other applications. This laser diode module can output 1W power with 830nm center wavelength.(more)

Thermoelectic cooler can also be called Peltier cooler or TEC module, which are often used for regulating the temperature of objects in applications such as solid state lasers, optical components, etc. This Peltier cooler ATE1-18 has two metalized surfaces on both the hot and cold side, which can be easily soldered. This TEC module has 18 Peltier elements with a maximum input voltage of 2.3V. This series of TEC modules have a wide temperature range, from −60°C to 200°C.(more)

NTC thermistor plays a vital role in many applications, due to its characteristics: the resistance decreases with the increase of the temperature and the resistance increases when the temperature falls. There are some application examples of NTC thermistor.(more)

Peltier cooler ATE1-07 has 7 pairs of Peltier elements, with a maximum input voltage of 0.9V. The size of this series TEC modules is small, less than 10mm. There are two ceramic plates on the both side of the TEC module.(more)

ATE1-17 series of Peltier coolers come with 17 pairs of Peltier elements, with a maximum input voltage of 2.2V. There are two insulated lead wires, one is red for positive and the other is black for negative, as shown in the photo below.(more)

The Inductor kit is a research and development product of ATI, which is utilized to store inductive elements. Inductor kits released by our company have high quality and long service lifetime. There are 128 individually lidded compartments, and inductor values are printed on each lid. In order to find inductors easily, the values are arranged in the order from left to right and from top to bottom. Each lid inside is very tight so that internal chip inductors can be ensured not to leak or lose. The following is the photo of an actual inductor kit.(more)

Peltier cooler ATE1-31 has 31 pairs of Peltier elements, with two ceramic plates and two lead wires of different colors. The maximum voltage is 3.9V, and the maximum current is variable due to the height of the Peltier elements. There are several models in this series.(more)

NTC thermistor in series in AC circuit functions like current insurance. How does this insurance do in the circuit? When the circuit is powered on, there produces an instant surge current. Thermistors can suppress this current. After this, the current will keep stable, and then the NTC thermistor will decrease its resistance to an ignorable value, which will not influence the current.(more)