The ATH100KL2C is a capped ntc thermistor. There is a glass encapsulated thermistor head packaged in a compact ring lug of this ntc thermistor.(more)

The ATH100KL2B is a similar capped ntc thermistor assembly to with ATH100KL2C. Both of them has a thermistor head of ATH100K1R25, which is a glass encapsulated thermistor. Outside this thermistor head, there is a ring lug. The ATH100KL2B series thermistor also has three versions, ATH100KL2B, ATH100KL2BT70 and ATH100KL2BT70S. The ATH100KL2B has two bear leads coated with copper; the ATH100KL2BT70S has the two leads covered by high temperature plastic tubing and sealed by epoxy, while the ATH100KL2BT70 is the non-sealed, but with high temperature plastic tubing.(more)

TECs stand for thermal electric coolers, which have been widely used to cool and heat the objects in many fields, such as instrumentation, PCR equipment, thermal cycling system, cooling device and analysis equipment. As TECs have no moving parts, no noise, environment friendly and long service life, it has been more and more popular in electronic fields.(more)

ATI provides a variety of basic NTC thermistor, such as ATH10KR8, ATH10K1R0, or ATH10K1R25. These NTC thermistors come with high stability and accuracy, which can be used for optical components, industrial fields that high precision temperature measurement and control is needed.(more)

Peltier controller is a kind of electronic module, which is designed and produced by Analog Technologies Inc. (ATI). There is a variety of Peltier controllers in ATI, such as TECA1-XV-XV-D series, ATFC105D series, ATW3A314 series and so on.(more)

ATH10K1R0 is a NTC thermistor with thermistor head encapsulated with glass instead of epoxy. Glass encapsulated NTC thermistor presents better long term stability, more compact size, shorter response time, and a wider temperature range.(more)

ATH10KL2B is a NTC thermistor with an extra small ring lug that is used for easy fixing. There is a glass encapsulated NTC thermistor ATH10K1R25 with high stability and accuracy inside the ring lug. Glass encapsulated thermistor presents better long term stability and reliability, and has a wider temperature range.(more)

For various electronic SMT components such as inductors, resistors and capacitors, a proper kit for collecting them is very practical and important. ATI researched and developed a SMT component kit about 20 years ago, which are still protected by USPTO for its patent. The designer is a professional electronic engineer, who found it difficult and inconvenient to arrange and collect different SMT components on the workbench before the kit was invented. These components are essential for basic electronic design, but it takes a lot time to find the right one among a pile of components when they are all put on the workbench. Thus, the SMT component kits were designed and produced.(more)

Peltier controller is an independent research and development product of ATI, which is designed for drivingthermoelectric coolers (TECs) to regulate the object temperature. Peltier controller has many good characteristics, such as high energy efficiency, high stability, high accuracy, compact size, etc. As shown in Figure 1, this Peltier controller packaged in a six sided metal enclosure has zero EMI to avoid the interference with other electronics. Peltier controller can realize such functions as thermistor T-R curve linearization, temperature measurement and monitoring, temperature control loop status indication, TEC voltage monitoring, power up delay, and shut down.(more)

TEC5V4A-D is a kind of Peltier controller, which is used to monitor and regulate the object temperature. The maximum output current of Peltier controller TEC5V4A- Dis 4A and the maximum output voltage is 4.7V. This Peltier controller has high efficiency and high reliability. Peltier controller provides two packaging methods, DIP package and SMT package. The following is the physical photo of Peltier controller TEC5V4A-D.(more)