The ATH100KL2B is a similar capped ntc thermistor assembly to with ATH100KL2C. Both of them has a thermistor head of ATH100K1R25, which is a glass encapsulated thermistor. Outside this thermistor head, there is a ring lug. The ATH100KL2B series thermistor also has three versions, ATH100KL2B, ATH100KL2BT70 and ATH100KL2BT70S. The ATH100KL2B has two bear leads coated with copper; the ATH100KL2BT70S has the two leads covered by high temperature plastic tubing and sealed by epoxy, while the ATH100KL2BT70 is the non-sealed, but with high temperature plastic tubing.(more)

Thermoelectic cooler can also be called Peltier cooler or TEC module, which are often used for regulating the temperature of objects in applications such as solid state lasers, optical components, etc. This Peltier cooler ATE1-18 has two metalized surfaces on both the hot and cold side, which can be easily soldered. This TEC module has 18 Peltier elements with a maximum input voltage of 2.3V. This series of TEC modules have a wide temperature range, from −60°C to 200°C.(more)

NTC thermistor plays a vital role in many applications, due to its characteristics: the resistance decreases with the increase of the temperature and the resistance increases when the temperature falls. There are some application examples of NTC thermistor.(more)

Peltier cooler ATE1-07 has 7 pairs of Peltier elements, with a maximum input voltage of 0.9V. The size of this series TEC modules is small, less than 10mm. There are two ceramic plates on the both side of the TEC module.(more)

TECs stand for thermal electric coolers, which have been widely used to cool and heat the objects in many fields, such as instrumentation, PCR equipment, thermal cycling system, cooling device and analysis equipment. As TECs have no moving parts, no noise, environment friendly and long service life, it has been more and more popular in electronic fields.(more)

ATE1-17 series of Peltier coolers come with 17 pairs of Peltier elements, with a maximum input voltage of 2.2V. There are two insulated lead wires, one is red for positive and the other is black for negative, as shown in the photo below.(more)

The Inductor kit is a research and development product of ATI, which is utilized to store inductive elements. Inductor kits released by our company have high quality and long service lifetime. There are 128 individually lidded compartments, and inductor values are printed on each lid. In order to find inductors easily, the values are arranged in the order from left to right and from top to bottom. Each lid inside is very tight so that internal chip inductors can be ensured not to leak or lose. The following is the photo of an actual inductor kit.(more)

Peltier cooler ATE1-31 has 31 pairs of Peltier elements, with two ceramic plates and two lead wires of different colors. The maximum voltage is 3.9V, and the maximum current is variable due to the height of the Peltier elements. There are several models in this series.(more)

NTC thermistor in series in AC circuit functions like current insurance. How does this insurance do in the circuit? When the circuit is powered on, there produces an instant surge current. Thermistors can suppress this current. After this, the current will keep stable, and then the NTC thermistor will decrease its resistance to an ignorable value, which will not influence the current.(more)

NTC thermistor refers to thermistors with negative temperature coefficient. When the temperature rises, the resistance of NTC thermistors will decrease, and when the temperature falls, the resistance will increase.(more)