TEC5V4A-D is a high efficiency Peltier controller, which is designed and produced by ATI. TEC5V4A-DPeltier controller comes with many interface ports that can be used to set the required object temperature and the maximum output voltage. This Peltier controller has high efficiency, high accuracy, high reliability, etc. Because of the above advantages, TEC5V4A-DPeltier controller has been widely utilized to drive TEC (thermoelectric cooler). The following is the photo of TEC5V4A-DPeltier controller.(more)

ATH10K1R0 is a NTC thermistor with thermistor head encapsulated with glass instead of epoxy. Glass encapsulated NTC thermistor presents better long term stability, more compact size, shorter response time, and a wider temperature range.(more)

ATH10KL2B is a NTC thermistor with an extra small ring lug that is used for easy fixing. There is a glass encapsulated NTC thermistor ATH10K1R25 with high stability and accuracy inside the ring lug. Glass encapsulated thermistor presents better long term stability and reliability, and has a wider temperature range.(more)

For various electronic SMT components such as inductors, resistors and capacitors, a proper kit for collecting them is very practical and important. ATI researched and developed a SMT component kit about 20 years ago, which are still protected by USPTO for its patent. The designer is a professional electronic engineer, who found it difficult and inconvenient to arrange and collect different SMT components on the workbench before the kit was invented. These components are essential for basic electronic design, but it takes a lot time to find the right one among a pile of components when they are all put on the workbench. Thus, the SMT component kits were designed and produced.(more)

Peltier controller is an independent research and development product of ATI, which is designed for drivingthermoelectric coolers (TECs) to regulate the object temperature. Peltier controller has many good characteristics, such as high energy efficiency, high stability, high accuracy, compact size, etc. As shown in Figure 1, this Peltier controller packaged in a six sided metal enclosure has zero EMI to avoid the interference with other electronics. Peltier controller can realize such functions as thermistor T-R curve linearization, temperature measurement and monitoring, temperature control loop status indication, TEC voltage monitoring, power up delay, and shut down.(more)

TEC5V4A-D is a kind of Peltier controller, which is used to monitor and regulate the object temperature. The maximum output current of Peltier controller TEC5V4A- Dis 4A and the maximum output voltage is 4.7V. This Peltier controller has high efficiency and high reliability. Peltier controller provides two packaging methods, DIP package and SMT package. The following is the physical photo of Peltier controller TEC5V4A-D.(more)

TEC5V4A-D is a kind of Peltier controller, which is used to monitor and regulate the object temperature. The maximum output current of Peltier controller TEC5V4A- Dis 4A and the maximum output voltage is 4.7V. This Peltier controller has high efficiency and high reliability. Peltier controller provides two packaging methods, DIP package and SMT package. The following is the physical photo of Peltier controller TEC5V4A-D.(more)

For NTC thermistor, the most important property is its service life. Long life NTC thermistor is an improvement of the recognition of NTC thermistor, which stresses the importance of service life. Long service life refers that it can work well after experiencing tests of high accuracy, high sensitivity, high reliability, ultra high temperature, and high pressure.(more)

NTC thermistor is a negative temperature coefficient thermistor that is used to measure, monitor or control temperature in temperature system. ATH1R38M0.1%200CL5R3 is a thermistor assembly, which is encapsulated by glass and packaged in an extra compact ring lug. Glass encapsulated is for long term stability and reliability, while compact ring lug is for easy fixing on the target device.(more)

ATFC107D is the part number of12V20A digital Peltier controller. ATFC107D Peltier controller is designed to drive and monitor the working status of a thermoelectric cooler (TEC) assembly and a fan assembly. This Peltier controller comes with a digital display for parameter setting and monitoring. It also has compact size and high efficiency (more than 98%). Through USB port, Peltier controller can be connected to PC. Figure 1 is the photo of an actual ATFC107D Peltier controller.(more)