Ultra Low Noise Laser Drivers/Controllers ATLS250MA103
FEATURES
APPLICATIONS
| Part Number | STOCK | 1-9PCs | 10-49PCs | 50-199 PCs | 200-499 PCs | ≥500 PCs | Buy Now | Datasheet | Eval. BoardAvail. | Eval. BoardAvail.(Price) | Add TO WATCHLIST |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ATLS250MA103D | 52 | $59 | $56 | $52 | $49 | $44 |   |  | ATLS1A103DEV1.0 | $25 |
ATLS250MA103D can be used to drive laser diodes with low noise, including DPSSL, EDFA, SOA, fiber laser, direct diode lasers, etc.
The ATLS250MA103 is an electronic module designed for driving diode lasers with up to 250mA low noise current. When the maximum power consumed by the controller is maintained to <1W, it does not require a heat sink to operate. The controller has temperature compensation network so that the output current maintains the same even as the controller temperature rises. The output current of the ATLS250MA103 can be set by an input voltage linearly or modulated by an external large signal of up to 1.2MHz in bandwidth, resulting in a minimum 170nS rise and fall times at the output current.
A: For laser drivers ATLSXA201 and ATLSXA202, LIS pin should be toggled between these 2 voltages: a high value corresponding to the operation current and a low value corresponding to half of the threshold current of the laser the driver is driving.
