TEC5V4A-D is a kind of Peltier controller, which is used to monitor and regulate the object temperature. The maximum output current of Peltier controller TEC5V4A- Dis 4A and the maximum output voltage is 4.7V. This Peltier controller has high efficiency and high reliability. Peltier controller provides two packaging methods, DIP package and SMT package. The following is the physical photo of Peltier controller TEC5V4A-D.(more)

TEC5V4A-D is a kind of Peltier controller, which is used to monitor and regulate the object temperature. The maximum output current of Peltier controller TEC5V4A- Dis 4A and the maximum output voltage is 4.7V. This Peltier controller has high efficiency and high reliability. Peltier controller provides two packaging methods, DIP package and SMT package. The following is the physical photo of Peltier controller TEC5V4A-D.(more)

For NTC thermistor, the most important property is its service life. Long life NTC thermistor is an improvement of the recognition of NTC thermistor, which stresses the importance of service life. Long service life refers that it can work well after experiencing tests of high accuracy, high sensitivity, high reliability, ultra high temperature, and high pressure.(more)

NTC thermistor is a negative temperature coefficient thermistor that is used to measure, monitor or control temperature in temperature system. ATH1R38M0.1%200CL5R3 is a thermistor assembly, which is encapsulated by glass and packaged in an extra compact ring lug. Glass encapsulated is for long term stability and reliability, while compact ring lug is for easy fixing on the target device.(more)

ATFC107D is the part number of12V20A digital Peltier controller. ATFC107D Peltier controller is designed to drive and monitor the working status of a thermoelectric cooler (TEC) assembly and a fan assembly. This Peltier controller comes with a digital display for parameter setting and monitoring. It also has compact size and high efficiency (more than 98%). Through USB port, Peltier controller can be connected to PC. Figure 1 is the photo of an actual ATFC107D Peltier controller.(more)

Inductor kits were developed by Analog Technologies (ATI) in 1997. Inductor kits are our US-patented products, as shown in Figure 1. Inductor kits are very popular among electronic designers because of having compact size, carrying easily and searching elementconveniently.(more)

NTC thermistor ATH10KR8B is a replacement thermistor for ATH10KR8, which has stopped production. ATH10KR8B has wide applications, such as temperature sensing, measuring and controlling for laser diodes, optical components and other temperature control systems.(more)

ATFC105D is a kind of Peltier controller, which is designed for driving and monitoring TEC/Fan assemblies. The high output power for TEC of ATFC105D Peltier controller is 12V20A and it has high efficiency, more than 98%. Because of compact size and no heat sink required, it is very convenient to use this Peltier controller. The following is the physical photo of ATFC105D Peltier controller.(more)

ATH100KR8B is a negative coefficient thermistor, which has been commonly used for many years. This NTC thermistor is similar to ATH10KR8B, but has a different nominal resistance at 25°C, 100K ± 1%.(more)

ATH10K0.1%1R25 is a glass encapsulated NTC thermistor, with compact size and high stability and reliability. This NTC thermistor has a higher accuracy than a similar thermistor ATH10K1R25. The accuracy is about 0.1%, and the accuracy of ATH10K1R25 is 1%. Comparing with epoxy encapsulated thermistors, this high accuracy glass encapsulated NTC thermistor has wider temperature range, especially on the high end, better long term stability, smaller size, and shorter response time. The length of thermistor leads is 70 ± 1mm, and the lead diameter is 0.23mm. The diameter of NTC thermistor head is 1.25 ± 0.03mm. The nominal resistance at 25°C is 10K ± 1%. Insulation resistance is 50MΩ.(more)