ATH100KR8B is a negative coefficient thermistor, which has been commonly used for many years. This NTC thermistor is similar to ATH10KR8B, but has a different nominal resistance at 25°C, 100K ± 1%.(more)

ATH10K0.1%1R25 is a glass encapsulated NTC thermistor, with compact size and high stability and reliability. This NTC thermistor has a higher accuracy than a similar thermistor ATH10K1R25. The accuracy is about 0.1%, and the accuracy of ATH10K1R25 is 1%.(more)

TECA1-XV-XV-D is a kind of Peltier controllers, which is an electronic module with an output current up to 2.5A. This Peltier controller has high efficiency (more than 90%), high stability, high reliability and compact size, so it can meet variousdemands of driving thermoelectric cooler (TEC). TECA1-XV-XV-DPeltier controller is 100% lead (pb)-free and RoSHcompliant. Figure 1 is the physical photo of TECA1-XV-XV-DPeltier controller.TECA1-XV-XV-D is packaged in six sided metal enclosure, which blocks EMIs to avoid interferences between the controller and other electronics.(more)

The ATH100K1R25 is a high precision and glass encapsulated NTC thermistor with high stability. This NTC thermistor can be applied for temperature sensing for laser diodes, optical components, temperature control system, industrial process control, etc. All these applications require high temperature sensitivity, long term stability, and/or high sensing temperature.(more)

TEC5V4A-D is a high efficiency Peltier controller, which is designed and produced by ATI. TEC5V4A-DPeltier controller comes with many interface ports that can be used to set the required object temperature and the maximum output voltage. This Peltier controller has high efficiency, high accuracy, high reliability, etc. Because of the above advantages, TEC5V4A-DPeltier controller has been widely utilized to drive TEC (thermoelectric cooler). The following is the photo of TEC5V4A-DPeltier controller.(more)

SMT Inductor kits are designed and produced by Analog Technologies, Inc. It has been sold in US and overseas market for over 20 years with nearly 100% good feedback.(more)

Based on thermoelectric cooler (TEC), Peltier controller (TEC controller) is designed by ATI (Analog Technologies, Inc.). Peltier controller released by ATI has compact size, high stability, high reliability, high accuracy, long service lifetime, etc. It is 100 % lead (Pb)-free and RoHS compliant. There are many kinds of Peltier controllers in our company, TECA1-XV-XV-D series, ATEC24V10A-D series, ATEC24V10A series and so on. The following is the Physical photo of Peltier controller.(more)

An inductor is a passive electronic component, which is an important part in present electronic design. The inductor stores energy in the form of a magnetic field. SMT inductor is a very tiny component, which it's not easy to store and keep. SMT Inductor kits , designed and produced by ATI, provides a solution for storing surface mount inductors.(more)

NTC thermistor is a common temperature sensor in our life, which is popularly used in automobile, home appliance, and other fields.(more)

For NTC thermistor, when temperature rises, the resistance decreases exponentially. Mix, mold and sinter two or more metal oxides, manganese, copper, silicon, cobalt, iron, nickel and zinc to produce NTC thermistor. The resistivity and material constants vary with the composition ratio, the sintering temperature, the sintering temperature and the structural state. Now, there are some non-oxide NTC thermistor, such as silicon carbide, stannic selenide, and tantalum nitride.(more)