High Voltage Constant Current Laser Driver ATLSxA212

In order to meet the changing needs for using high voltage diode lasers or driving a series of diode lasers simultaneously, we have developed the ATLSXA212 series of laser drivers/controllers: ATLS50MA212D, ATLS500MA212D, ATLS1A212D, ATLS2A212D, and ATLS3A212D

ATLSxxx103 - ultra low noise series

ATLSxxx103 series laser controllers have ultra low noise, compact size, and comes with current limit protection. The maximum output current can be 100mA, 200mA, 250mA, 500mA, and 1A depending on module used. The output RMS noise is: 0.6uA, 1.2uA, 1.5uA, 3uA and 6uA respectively.

ATLS1A102 - 1 Amp Very Low Noise

ATLS1A102 is an electronic module designed for driving diode lasers with up to 1A low noise current. The output voltage is 1.5V to 4V when powered by a 5V power supply.
With the100 % lead (Pb)-free and RoHS compliant.

CWD-01-V2-D 2A High Efficiency controller

CWD-01-V2-D is designed for driving diode lasers with high efficiency, >90%, and low output noise 0.05%, high stability 100ppm /°C. including DPSSL, EDFA, fiber laser, direct diode lasers , etc. It can output up to 2A current and is packed in DIP package,
100 % lead (Pb)-free and RoHS compliant.

LDA1-CP1 - Drives P type diode lasers

The LDA1-CP1 is an electronic module designed for driving diode lasers (P type) with well controlled and monitored driving current and output laser pow-er. Its PWM (Pulse Width Modulation) output stage achieves >90% efficiency, eliminating the need for a heat sink. The output current and laser power can be set and monitored linearly at the same time. It comes with a high stability low noise 2.5V reference voltage which can be used for setting the output current and as voltage references for external ADCs and DACs.
With the100 % lead (Pb)-free and RoHS compliant.

LDA1-CP2 - Drives N type diode lasers

The LDA1-CP2 is an electronic module designed for driving diode lasers (N type) with well controlled and monitored driving current and output laser pow-er. Its PWM (Pulse Width Modulation) output stage achieves >90% efficiency, eliminating the need for a heat sink. The output current and laser power can be set and monitored linearly at the same time. It comes with a high stability low noise 2.5V reference voltage which can be used for setting the output current and as voltage references for external ADCs and DACs.
100 % lead (Pb)-free and RoHS compliant.

ATLSxx201-D series - 2A, 4A or 6A drivers

ATLSxx201-D series  is an electronic module designed for driving diodes with low noise, including DPSSL, EDFA, fiber laser, direct diode lasers , etc. It can provide 2A, 4A and 6A output current at up to 2.5V output voltage depending on module.
With the100 % lead (Pb)-free and RoHS compliant.

ATLSxA202D -Constant Current CW Driver

ATLSxA202D series is an electronic module designed for driving diode lasers 2 Amp or 3 Amp depending on module with constant current, high efficiency: >90%, low noise: 0.05%, high stability: 100 ppm/°C, zero EMI, and small package.
100 % lead (Pb)-free and RoHS compliant.

ATLSxA201D Laser Driver Eval. board

The evaluation board, ATLS201DEV1.0 , is designed for evaluating the series laser driver, ATLS2A201D, ATLS3A201D, ATLS4A201D and ATLS6A201D. The main purpose of using this module is to drive a voltage configurable and unbreakable dummy laser diode by using the laser driver with a programmable current. It is of a complete application circuit, and has an LED for indicating the woring status of the driver.

ATLSxA202D Laser Driver Eval. board

The evaluation board, ATLS202DEV1.0 , is designed for evaluating the series laser driver, ATLS2A202D, ATLS3A202D and ATLS4A202D. The main purpose of using this module is to drive a voltage configurable and unbreakable dummy laser diode by using the laser driver with a programmable current. It is of a complete application circuit, and has an LED for indicating the woring status of the driver.

Ultra-low Noise Laser Controller Eval. board

ATI's Evaluation Board for ultra low noise ATLSxxx103D Series Laser Controllers is designed to evaluate the functions of, ATLS200MA103, ATLS250MA103, ATLS500MA103, and ATLS1A103 controllers. It comes with a socket that can accepts DIP packaged controller, The eval. board has a dummy laser that can be used to emulate how a laser diode would be driven by the controller. The output current and current limit can be programmed according.
With the100 % lead (Pb)-free and RoHS compliant.